LG Electronics 32LB4D, 47LB5D, 37LB4D, 42LB4D, 42LB5D VCR Setup, When connecting with an antenna

VCR SETUP

■To avoid picture noise (interference), leave an adequate distance between the VCR and TV

■If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen.

When connecting with an antenna

i . e)

37/42/47/52 inches

ANTENNA/

CABLE IN

1

EXTERNAL EQUIPMENT

ANT OUT S-VIDEO VIDEO L R

ANT IN	OUTPUT
	SWITCH

Wall Jack

2

Antenna

1. How to connect

1Connect the RF antenna out socket of the VCR to the Antenna socket on the set.

2Connect the antenna cable to the RF antenna in socket of the VCR.

2.How to use

■Set VCR output switch to 3 or 4 and then tune TV to the same channel number.

■Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)

SETUP

23