09. Color (Command2:i)
To adjust the screen color
You can also adjust color in the Picture menu. Transmission [k][i][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
*Refer to ‘Real data mapping 1’ See page 104.
Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x]
10. Tint (Command2:j)
To adjust the screen tint.
You can also adjust tint in the Picture menu.
Transmission [k][j][ ][Set ID][ ][Data][Cr]
Data Red : 0 ~ Green : 64
*Refer to ‘Real data mapping 1’ See page 104.
Acknowledgement [ j ][ ][Set ID][ ][OK/NG][Data][x]
11. Sharpness (Command2:k)
To adjust the screen sharpness.
You can also adjust sharpness in the Picture menu. Transmission [k][k][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64
*Refer to ‘Real data mapping 1’ See page 104. Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x]
12. OSD Select (Command2:l)
To select OSD (On Screen Display) on/off.
Transmission [k][l][ ][Set ID][ ][Data][Cr]
Data 0: OSD off | Data 1: OSD on |
|
|
Acknowledgement [l][ | ][Set ID][ ][OK/NG][Data][x] |
|
|
13. Remote Control Lock Mode (Command2:m)
To lock the remote control and the front panel controls on the set.
Transmission [k][m][ | ][Set ID][ ][Data][Cr] |
Data 0: Lock off | Data 1: Lock on |
Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x]
If you’re not using the remote control and front panel controls on the TV, use this mode. When main power is on/off, remote control lock is released.
14Treble (Command2:r) To adjust treble.
You can also adjust treble in the Audio menu. Transmission [k][r][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64(*transmit by Hexadecimal code)
*Refer to ‘Real data mapping 1’ See page 104. Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x]
15.Bass (Command2:s) To adjust bass.
You can also adjust bass in the Audio menu. Transmission [k][s][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64(*transmit by Hexadecimal code) *Refer to ‘Real data mapping 1’ See page 104. Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x]
16.Balance (Command2:t)
To adjust balance.
You can also adjust balance in the Audio menu.
Transmission [k][t][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64(*transmit by Hexadecimal code) *Refer to ‘Real data mapping 1’ See page 104. Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]
17. Color Temperature (Command2:u) To adjust color temperature.
You can also adjust color temperature in the Picture menu.
Transmission [k][u][ ][Set ID][ ][Data][Cr]
Data 0: Medium 1: Cool 2: Warm 3: User
Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]
18. Red adjustment(Command:v)
To adjust red in color temperature
Transmission [k][v][ ][Set ID][][Data][Cr]
Data Min:0 ~ Max:C8
*Refer to "Real data mapping 2". See page 106.
Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x]
19. Green adjustment(Command:w)
To adjust green in color temperature.
Transmission [k][w][ ][Set ID][][Data][Cr]
Max:C8
*Refer to "Real data mapping 2". See page 106. Acknowledgement [w][ ][Set ID][ ][OK/NG][Data][x]