LG Electronics 42PC5D, 32LC7D owner manual VCR Setup, When connecting with an antenna

VCR SETUP

■To avoid picture noise (interference), leave an adequate distance between the VCR and TV.

■Use the ISM feature in the Option menu to avoid having a fixed image remain on the screen for a long period of time. If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. This phenomenon is common to all manufactures and in consequence the manufactures warranty does not cover the product bearing this phenomenon.

When connecting with an antenna

			RGB IN
			(PC)
			AUDIO IN	REMOTE
		HDMI IN	(RGB/DVI)	CONTROL IN
	ANTENNA/	2
	CABLE IN
	1	1			OPTICAL
S-VIDEO VIDEO L	R ANT OUT
			RS-232C IN		DIGITAL AUDIO
						S-VID
		HDMI/DVI IN	(CONTROL & SERVICE)		OUT
OUTPUT	ANT IN
SWITCH

Wall Jack

2

Antenna

1. How to connect

1Connect the RF antenna out socket of the VCR to the ANTENNA/CABLE IN socket on the set.

2Connect the antenna cable to the RF antenna in socket of the VCR.

2.How to use

■Set VCR output switch to 3 or 4 and then tune TV to the same channel number.

■Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)

EXTERNAL EQUIPMENT SETUP

23