APPENDIX
APPENDIX
10. Tint (Command2:j) To adjust the screen tint.
You can also adjust tint in the Video menu.
Transmission [k][j][ ][Set ID][ ][Data][Cr]
Data Red : 0 ~ Green : 64
*Refer to ‘Real data mapping’. G p.89.
Acknowledgement [ j ][ ][Set ID][ ][OK/NG][Data][x]
11. Sharpness (Command2:k) To adjust the screen sharpness.
You can also adjust sharpness in the Video menu. Transmission [k][k][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64
*Refer to ‘Real data mapping’. G p.89.
Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x]
12. OSD Select (Command2:l)
To select OSD (On Screen Display) on/off.
Transmission [k][l][ ][Set ID][ ][Data][Cr]
Data 0: OSD off Data 1: OSD on Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x]
13. Remote Control Lock Mode (Command2:m)
To lock the remote control and the front panel controls on the set.
Transmission [k][m][ | ][Set ID][ ][Data][Cr] |
Data 0: Lock off | Data 1: Lock on |
Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x] If you’re not using the remote control and front panel controls on the TV, use this mode. When main power is on/off, remote control lock is released.
14 . Treble (Command2:r) To adjust treble.
You can also adjust treble in the Audio menu. Transmission [k][r][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64(*transmit by Hexadecimal code) *Refer to ‘Real data mapping’. G p.89.
Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x]
15 . Bass (Command2:s) To adjust bass.
You can also adjust bass in the Audio menu.
Transmission [k][s][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64(*transmit by Hexadecimal code) *Refer to ‘Real data mapping’. G p.89.
Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x]
16. Balance (Command2:t) To adjust balance.
You can also adjust balance in the Audio menu.
Transmission [k][t][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64(*transmit by Hexadecimal code) *Refer to ‘Real data mapping’. G p.89.
Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]
17. Color Temperature (Command2:u) To adjust color temperature.
You can also adjust color temperature in the Video menu.
Transmission [k][u][ ][Set ID][ ][Data][Cr]
Data 0: Medium 1: Cool 2: Warm 3: User
Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]
18. ISM Method (Command2:p)
To avoid having a fixed image remain on screen. (This feature is not available for all models.) Transmission [ j ][p][ ][Set ID][ ][Data][Cr]
Data 1: Inversion | 2: Orbiter |
4: White Wash | 8: Normal |
Acknowledgement [p][ ][Set ID][ ][OK/NG][Data][x]
19. Low Power (Command2:q)
To control the low power function on/off. (This feature is not available for all models.) Transmission [ j ][q][ ][Set ID][ ][Data][Cr]
Data 0: Low power off 1: Low power on Acknowledgement [q][ ][Set ID][ ][OK/NG][Data][x]
20. Channel Tuning (Command: m a)
To tune channel to following physical/major/minor number. Transmission [m][a][ ][Set ID][ ][Data0][ ][Data1]
[ ][Data2][ ][Data3][ ][Data4][ ][Data5][Cr]
Digital channels have a Physical, Major, and Minor channel number. The Physical number is the actual digital channel num- ber, the Major is the number that the channel should be mapped to, and the Minor is the
Data 0: Physical Channel Number
NTSC air: 02~45, NTSC cable: 01, 0E~7D
ATSC air: 01~45, ATSC cable: 01~87
Data1 & 2: Major Channel Number
Data1: High byteData2: Low byte
Two bytes are available for the Major and Minor, nor- mally only the second byte is used.
Data3 & 4: Minor Channel Number
Not needed for NTSC.
90