LG Electronics 50PT490E Transmits the analog video signal from your PC to, Graphics card to, Use

MAKING CONNECTIONS 73

RGB Connection NOTE

Transmits the analog video signal from your PC to					yyTo get the best picture quality, adjust the PC
					graphics card to 1024x768.
the TV. Connect the PC and the TV with the D-sub
					yyDepending on the graphics card, DOS mode
15 pin signal cable as shown in the following
					may not work if a HDMI to DVI Cable is in
illustrations. To transmit an audio signal, connect
					use.
an audio cable.
					yyIn PC mode, there may be noise associated
					with the resolution, vertical pattern, contrast
/DVI IN		AV IN 1			or brightness.
	VIDEO	L(MONO) AUDIO	R		yyIf noise is present, change the PC output to
2	RGB IN (PC)	AUDIO IN
		(RGB/DVI)			another resolution, change the refresh rate
1			2
AUDIO OUT					to another rate or adjust the brightness and
OPTICAL				NI
DIGITAL				COMPONENT ANTENNA IN CABLE IN
RS-232C IN	VIDEO	AUDIO			contrast on the PICTURE menu until the
Y	PB	PR L	R
			1		picture is clear.
(CONTROL& SERVICE)
					yyAvoid keeping a fixed image on the screen
					for a long period of time. The fixed image
			RGB OUT (PC) AUDIO OUT		may become permanently imprinted on the
					screen.
					yyThe synchronization input form for Horizontal
					and Vertical frequencies is separate.
					yyDepending on the graphics card, some
					resolution settings may not allow the image
					to be positioned on the screen properly.
					yyWhen selecting HDMI-PC, set the “Input
					Label - PC” in the INPUT menu.

ENGLISH