LG Electronics 50PT490E OSD Select Command k l ISM Method Command j p, Energy Saving Command j q

ENGLISH

90EXTERNAL CONTROL DEVICE SETUP

12. OSD Select (Command: k l)			18. ISM Method (Command: j p)
	To select OSD (On Screen Display) on/off.			To avoid having a fixed image remain on screen.
	Transmission [k][l][ ][Set ID][ ][Data][Cr]		Transmission [ j ][p][ ][Set ID][ ][Data][Cr]
	Data 00: OSD off	Data 01: OSD on		Data 02: Orbiter
					04: White Wash
	Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x]
					08: Normal
13. Remote Control Lock Mode (Command: k m)					20: Color Wash
				Acknowledgement [p][ ][Set ID][ ][OK/NG][Data][x]
	To lock the remote control and the front panel
	controls on the set.
			19. Energy Saving (Command: j q)
	Transmission [k][m][ ][Set ID][ ][Data][Cr]
				To control the energy saving function.
	Data 00: Lock off	Data 01: Lock on
				Transmission [ j ][q][ ][Set ID][ ][Data][Cr]
	Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x]
				Data 00: off
	If you’re not using the remote control and front panel
					01: Minimum
	controls on the Monitor set, use this mode. When
					02: Medium
	main power is on/off, remote control lock is released.
					03: Maximum
	If Key Lock is on in the standby mode, TV will not
					04: Auto/Intelligent sensor (depending on model)
	turn on by POWER button of remote control and on
					05: Screen off
	the TV.
				Acknowledgement [q][ ][Set ID][ ][OK/NG][Data][x]
14. Treble (Command: k r)
	To adjust treble.		20. Auto Configuration (Command: j u)
	You can also adjust treble in the AUDIO menu.			To adjust picture position and minimize image
				shaking automatically. Auto configuration only works
	Transmission [k][r][ ][Set ID][ ][Data][Cr]
				in RGB-PC mode.
	Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal
				Transmission [ j ][u][ ][Set ID][ ][Data][Cr]
	code)
	*Refer to “Real data mapping”.			Data 01: To set
	Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x]		Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]
15. Bass (Command: k s)			21. Channel Tuning (Command: m a)
	To adjust bass.			To tune channel to following physical number.
	You can also adjust bass in the AUDIO menu.
					Transmission [m][a][ ][Set ID][ ][Data00][ ][Data01]
	Transmission [k][s][ ][Set ID][ ][Data][Cr]				[ ][Data02][Cr]
	Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal			Data 00: High channel data
	code)			Data 01: Low channel data
	*Refer to “Real data mapping”.			ex.
	Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x]			No.47 ➙ 00 2F (2FH)
				No.394 ➙ 01 8A (18AH)
16. Balance (Command: k t)				DTV No.0 ➙ Don’t care
	To adjust balance.			Data 02:
	You can also adjust balance in the AUDIO menu.			0x00: Analog Main
				0x10: DTV Main
	Transmission [k][t][ ][Set ID][ ][Data][Cr]
				0x20: Radio
	Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal
				0x80: CATV Main
	code)
				Channel data range
	*Refer to “Real data mapping”.
				Analog air: Min 02 - Max 45 (2 - 69)
				Analog cable: Min 01 - Max 7D (1 - 125)
	Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]
				Digital: Min 01 - Max 3E7 (1 - 999)

17.Color Temperature (Command: x u) To adjust color temperature.

You can also adjust color temperature in the PICTURE menu.

Transmission [x][u][ ][Set ID][ ][Data][Cr]

Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)

*Refer to “Real data mapping”. Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]

Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x] Digital: Min 00 - Max 7DH

22.Channel Add/Del (Command: m b) To add and delete the channels. Transmission [m][b][ ][Set ID][ ][Data][Cr]

Data 00: Channel Delete Data 01: Channel Add Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]