LG Electronics 50PT490E Power Command k a, Volume Control Command k f To adjust volume

Page 89

EXTERNAL CONTROL DEVICE SETUP 89

01.Power (Command: k a)

To control Power On/Off of the set.

Transmission [k][a][ ][Set ID][ ][Data][Cr]

Data 00: Power Off

Data 01: Power On

Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x]

*In a like manner, if other functions transmit ‘FF’ data based on this format, Acknowledgement data feedback presents status about each function.

*Note: In this model, set will send the Acknowledge after power on processing completion.

There might be a time delay between command and acknowledge.

02.Input Select (Command: x b) To select input source for set.

Transmission [x][b][ ][Set ID][ ][Data][Cr]

Data 00: DTV (Antenna)

 

Data 10: Analog (Antenna)

Data 11: Analog (Cable)

Data 20: AV1

Data 21: AV2

Data 40: Component1

Data 41: Component2

Data 60: RGB-PC

Data 90: HDMI1

Data 91: HDMI2

Data 92: HDMI3

Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]

*Use the feature depending on your model.

03.Aspect Ratio (Command: k c) To adjust the screen format.

Transmission [k][c][ ][Set ID][ ][Data][Cr]

Data 01: 4:3

Data 09: Just Scan

Data 02: 16:9

Data 10: Cinema Zoom 1

Data 04: Zoom

…

Data 06: Original

Data 1F: Cinema Zoom16

Data 07: 14:9

Data 0B: Full Wide

Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]

04.Screen Mute (Command: k d) To select screen mute on/off. Transmission [k][d][ ][Set ID][ ][Data][Cr]

Data 00: Screen mute off (Picture on), Video-out Mute off

Data 01: Screen mute on (Picture off)

Data 10: Video-out Mute on

Acknowledgement [d][ ][Set ID][ ][OK/NG][Data][x]

*In case of Video-out Mute on only, TV will display On Screen Display (OSD). But, in case of screen mute on, TV will not display On Screen Display (OSD).

05.Volume Mute (Command: k e) To control volume mute on/off.

You can also adjust mute using the MUTE button on remote control.

Transmission [k][e][ ][Set ID][ ][Data][Cr]

Data 00: Volume mute on (Volume off)

Data 01: Volume mute off (Volume on)

Acknowledgement [e][ ][Set ID][ ][OK/NG][Data][x]

06.Volume Control (Command: k f) To adjust volume.

You can also adjust volume with the volume buttons on remote control.

Transmission [k][f][ ][Set ID][ ][Data][Cr]

Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)

*Refer to “Real data mapping”. Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x]

07.Contrast (Command: k g) To adjust screen contrast.

You can also adjust contrast in the PICTURE menu. Transmission [k][g][ ][Set ID][ ][Data][Cr]

Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)

*Refer to “Real data mapping”. Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]

08.Brightness (Command: k h) To adjust screen brightness.

You can also adjust brightness in the PICTURE menu.

Transmission [k][h][ ][Set ID][ ][Data][Cr]

Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)

*Refer to “Real data mapping”. Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x]

09.Color (Command: k i) To adjust screen color.

You can also adjust color in the PICTURE menu. Transmission [k][i][ ][Set ID][ ][Data][Cr]

Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)

*Refer to “Real data mapping”. Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x]

10.Tint (Command: k j) To adjust screen tint.

You can also adjust tint in the PICTURE menu. Transmission [k][j][ ][Set ID][ ][Data][Cr]

Data Red: 00 ~ Green: 64 (*transmit by Hexadecimal code)

*Refer to “Real data mapping”. Acknowledgement [ j ][ ][Set ID][ ][OK/NG][Data][x]

11.Sharpness (Command: k k) To adjust screen sharpness.

You can also adjust sharpness in the PICTURE menu. Transmission [k][k][ ][Set ID][ ][Data][Cr]

Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)

*Refer to “Real data mapping”.

Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x]

ENGLISH

Page 88 Page 90
Image 89
Page 88 Page 90
Contents Plasma TV Licenses Important Safety Instructions English YyDISCONNECTING Device from the Main YyCleaningAntenna grounding according to the National YyGroundingYyGenerated Sound YyDot DefectTable of Contents Entertainment Unpacking Remote control and batteries AAAAssembling and Preparing Charging Cable Additional accessoriesM5 x M6 x M4 x Screw for assembly Cable holder Optional Extras Parts and buttons Lifting and moving the TV Setting up the TVAttaching the stand ProtectionStand Pole Model Screw for Number Assembly Screws 50PT490E M4 xStand Base Mounting on a table Make sure to use screws and wall mounts that Mounting on a wallWall mount kits are described in the following VesaAttaching Pen Holder Bracket Tidying cablesPower Remote ControlTV / RAD ViewMark VOLMute BackControl buttons Colored buttonsSubtitle FreezeConnecting an antenna or basic cable Connecting to an antenna or cableCopper wire Watching TVTurning the TV on for the first time Language Mode Setting Time Zone Auto TuningManaging channels Setting up channelsWatching TV FAV Using favorite channelsEnter Next 1140 News Checking current program infoStart time Progress bar HE-AACInfo Button DescriptionNOW/NEXT Guide Mode EPG Electronic Program Guide In digital modeDay Guide Mode Date Setting ModeSchedule List Mode Manual Timer ModeResizes images to the previous standard Using additional optionsAdjusting aspect ratio Changing AV modes Using the input listChild Lock Locking the buttons on the TVKey Lock and press Enter OffUsing the customer support Using the quick menuTesting the Picture / Sound Using the product or service informationPentouch Using PentouchInstalling the Pentouch Program Step of using the Pentouch ProgramInstalling the USB Dongle Driver System RequirementsWhat is Pairing? Pairing between Touch Pen and DongleRemoving the Pentouch Program and Driver No. DescriptionYyPentouch operation may not be normal while charging Display Resolution Settings for Pentouch Using the Pentouch FunctionWindows XP Windows VistaEnglish Select Setting from the Pentouch Home When you select the SettingChecking the Pentouch FunctionsFixed Toolbar Functions Using ToolbarSelect image for background Using SketchbookRotation MoveExpansion / Reduction Using Photo Editor Specialized toolbar functions Use the toolbar to create and decorate the family diary Using Family DiaryUsing Gallery Memo Using InternetSelect image for memo Capture allMy Office Using My OfficeEntertainment Connecting USB storage devicesButton Description Green Browsing filesButton List Yellow Type Supported File FormatsMusic yyMP3 Viewing VideosEnergy Produced with certain encodersSet Audio Set Video PlaySet Video DivX registration code Menu Viewing PhotosMode BGMSet Photo View Listening to musicOption Description Slide Speed Menu Description Play MarkedSet Audio Play Yy Non-supported files are displayed usingSelect Repeat or Random option Time elapsed /DurationLock See p.66 Locks or unlocks Channels and programs Customizing TV SettingsMain Menus Available channel settings are described in the following Customizing SettingsSetup Settings Available picture settings are described in the following Picture SettingsBasic Image Options Setting Description Picture ModeScreen OptionColor Temperature Setting Description Dynamic ContrastDynamic Color Noise ReductionSystem Setting Description Color ManagementSetting Description Auto Volume Audio SettingsSound Mode Clear VoiceDigital Audio SettingOut Audio Input Digital Audio outputAvailable time settings are described in the following Time SettingsSetting Description Clock Sleep TimerAvailable lock settings are described in the following Lock SettingsOption Settings Set ID Setting Description ISM MethodFactory Reset Making Connections Gaming device Connection OverviewHdmi Connection Connecting to a HD receiver, DVD or VCR playerDVI to Hdmi Connection Component ConnectionComposite Connection Connecting to a PCPin signal cable as shown in the following Transmits the analog video signal from your PC toIllustrations. To transmit an audio signal, connect With the resolution, vertical pattern, contrastDigital optical audio connection Connecting to an Audio SystemConnecting to a USB Simplink Connection Activating and Using Simplink menusUpdating the TV Firmware MaintenancePower cord Cleaning Your TVPreventing Image burn or Burn-in on your TV screen Screen and frameGeneral TroubleshootingProblem Resolution Movie Pentouch Models SpecificationsComponent port connecting information RGB PC, Hdmi PC supported modeHdmi DTV supported mode Component supported modeFile Video Decoder Audio Codec Max Resolution Extension Name Code Function Hexa IR CodesRS-232C Setup External Control Device SetupType of connector D-Sub 9-Pin Male RS-232CWire Configuration Serial female-female Null modem cable RS-232C configurationsWire Configurations Not standard Set ID Set ID numberDATA00 DATA01 DATA02 DATA03 DATA04 DATA05 Command reference listData Command2 Set ID OKDatax Command1Command2 Set ID DataCrCommand2 Set ID NGDatax Transmission / Receiving protocolVolume Control Command k f To adjust volume Power Command k aRemote Control Lock Mode Command k m OSD Select Command k l ISM Method Command j pEnergy Saving Command j q Treble Command k rKey Command m c License Component Open Source LicenseOpen source software notice Preamble GNU General Public LicenseEnglish English END of Terms and Conditions No WarrantyEnglish English English English No Warranty How to Apply These Terms to Your New Libraries ‘’Contributor’’ Definitions Commercial Use‘’Contributor Version’’ ‘’Covered Code’’You’’ or Your 11. ‘’Source Code’’Source Code License Initial Developer Grant Contributor GrantAvailability of Source Code Distribution Obligations Application of LicenseDescription of Modifications Intellectual Property Matters Third Party ClaimsDisclaimer of Warranty English Responsibility for Claims MiscellaneousMULTIPLE-LICENSED Code Exhibit a -Mozilla Public LicenseOpenSSL License MIT license Expat license Legal Terms Definitions No WarrantyRedistribution AdvertisingJpeg license Xyssl StraceRSA Data Security license Model Serial
Top Page Image Contents