FMA-100 Installation Procedures

Purpose and Definition

Delivery of the channel lineup requires the installation and con- figuration of an FTG Management Appliance (FMA-100). This section contains steps to install and configure the FMA-100.

FMA-100 Connections

Refer to the FMA-100 diagram and connectivity table for con- nections and port information.

FMA-100 Connectivity

Port Name	Description
Ethernet	Connects via Ethernet (crossover) cable to the
	laptop or tablet for configuration purposes.
	Connects via Ethernet (straight-through) cable
	to the hotel’s network, if available.
RF Out	Connects via coaxial cable to the combiner in
	the FTG rack.
RF In	Not Applicable
Serial Out	Not Applicable
Kports 0-9	Not Applicable

Install the FMA-100 in an FTG Rack

Complete the following steps to install the FMA-100 in the FTG rack.

1.Mount the FMA-100 in the FTG rack, if applicable.

2.Plug the FMA-100 into the FTG rack’s power strip, if applicable.

ETHERNET SERIAL OUT

RF IN

RF OUT

75 ohm

To HotelTerminator Network

To Guest

Rooms

6MLP-50	To AC
Filter	Power

FMA & FTG

Combiner

Free-To-Guest

206-4077	P A G E 7