Configure the Channel Lineup
1.Select the Configure Channel Lineup link. A login screen will appear.
2.Type lnet in the User name field.
3.Type the appropriate password in the Password field.
4.Select the OK button.
5.Use the Channel Select
Note: Up to 100 channels can be configured in the
6.Select the Go button to display the selected channel range.
7.Add the FTG channels to the lineup.
•Select the appropriate tuning type from the Tuning Type
•Type the analog modulator in the Analog Mod field,
if applicable.
•Type the digital modulator in the Digital Mod field, if applicable.
•Type the digital stream in the Digital Stream field, if applicable.
•Type the FTG channel’s OSD (On Screen Display) in the OSD field.
-The OSD and Call Letters fields (combined) can have a max of 17 characters including spaces.
-If a channel has both OSD and Call Letters they will be separated by a dash
•Type the station’s call letters in the Call Letters field.
•Select Enabled from the State
•Repeat these steps for each additional FTG channel listed on the page.
8.Select the Save Configuration button after all the FTG channels on the page have been configured.
Warning: The Save Configuration button must be selected before configuring or editing the channel lineup for a different 
channel range! If the Save Configuration button is not
selected before configuring a different page of chan- nels, the channel configurations for that page will be lost!
9.Repeat the channel configuration steps for another channel range until all FTG channels are configured.
10.Type the first channel the TV should access when it is pow- ered on in the Startup Channel field.
Notes:
•If the Startup Channel is disabled, the lowest enabled channel will default as the new Startup Channel.
•Auxiliary sources should not be configured as the Startup Channel.
11.Select the Save Configuration button.
12.Wait for the page to refresh/reload.
13.Select the View Channel Lineup link to return to the Current Channel Lineup screen.
P A G E 9 |