Audiovox FPE3705 manual Setting System, Adjusting Screen Aspect, Reducing Picture Noise, VCR mode

Setting System

Setting System In TV Mode

Adjusting Screen Aspect

1	Press Menu to display the menu main page.	MAIN MENU
		Picture
2	Press CH5/6 repeatedly to select System item.		Aspect Ratio
		Sound	N/R
3	Press Enter to access the submenu.	CH	VCR mode
			Default
4	The Aspect Ratio item will be highlighted automatically.	System
	Press Enter repeatedly to select a desired aspect ratio.	OSD
	You can select the image aspect ratio between 4:3, Panorama , Zoom and16:9.	TVPC	16:9
	4:3 –– For 4:3 signal format. This mode displays a 4:3 picture at its standard 4:3 size	Setup

without any stretching.

16:9 –– For 16:9 signal format. This mode displays 16:9 aspect ratio picture.

Panorama –– In this mode the picture is progressively stretched toward each side of the screen.

Zoom –– For 4:3 letterbox signal format. This mode stretches the picture horizontally and crops the top and bottom black bars of the picture.

Note:

You may quickly select the screen aspect by using the Screen button on the remote control.

Reducing Picture Noise

1	Press Menu to display the menu main page.	MAIN MENU
		Picture
2	Press CH5/6 repeatedly to select System item.
		Sound
3	Press Enter to access the submenu.	CH
4	Press CH5/6repeatedly to select N/R item.	System
		OSD
5 Press Enter to select Off, Auto, Strong, Middle or Weak.
		TVPC
	Sometimes a noisy picture may appear on the screen because of poor signal. This	Setup
	function helps to enhance the picture quality by reducing the noise.

Aspect Ratio

N/R

VCR mode

Default

Auto

VCR mode

1	Press Menu to display the menu main page.
2	Press CH5/6 repeatedly to select System item.
3	Press Enter to access the submenu.

4 Press CH5/6 repeatedly to select VCR mode item.

5 Press Enter to select On or Off.

When you are watching VCR program type or receiving weak signal, please set the "VCR mode" item to "On". It helps to obtain a better synchronization and improve

MAIN MENU

Picture

Sound

CH

System

OSD

TVPC

Setup

Aspect Ratio

N/R

VCR mode

Default

On

Loading Default Values

You may quickly load default values by using the Default item.

23