Beko 40WLU550FHID manual External Equipment Connections, Headphone Connection

Page 27

9External Equipment Connections:

Your TV is equipped with 10 inputs including aerial input, which allows for the external device connection. These inputs are:

1-Aerial input

2-SCART1 input

3-SCART2 input

4-AV input

5-S-Video input

6-PC input

7-HDMI1 input

8-HDMI2 input

9-YPbPr Component input

10-CI input

You can connect your external device to your TV via these inputs. By pressing the AV button on your remote control, select the external source input to which you connected your device.

9.1-Headphone Connection		Side view of TV
		Side view of TV
The headphones must have
impedance between 8 and
impedance between 8 and
32 ohms and have a 3.5
mm stereo jack plug. Plug
mm stereo jack plug. Plug
the headphone jack into the
the headphone jack into the
headphone socket of the TV.

9.2-Connecting an external equipment via Scart connection

	of TV	or
	or Rear view
		or
	Sidoe

SCART : To watch the picture of the broadcast device connected to SCART, select Scart from the Source menu and press OK button. (You can watch via this Scart if the connected device has a RGB output).

25

VCR

DECODER

DVD

SATELLITE RECEIVER

GAME CONSOLE

Image 27

Contents Operation Instructions Table of Contents Important Information Cleaning the screen and cabinetDisposing of your TV at the end of service life Superior features of your integrated digital televisionChanging the plug Special Features Features of your new televisionPlease consider all warnings Important Safety InstructionsPower connections Please observeNever operate your FireCause permanent loss of hearing Batteries. There is the risk of explosion Batteries Aerial connection Powering on your TV and the initial useInitial power on and performing settings StartYour new television TV Control PanelRear and Side External Connections Digital Mode Only Remote ControlTV controls Performing the initial power-on settingsOr finish the searching process by pressing the Menu button Turning on the TV and Setting the ChannelsPerforming Digital Tunings Automatic Tuning of Channels and Storing in the MemoryManual tuning of channels and storing in the memory First Time InstallationPress Menu Select Setup Electronic TV Guide EPG FAV button on your remote controlProgram Table Creating favorite channels listSelect Subtitling Language Digital FeaturesLanguage Settings Access ControlPerforming Analog Tunings Simply press the Exit button Fine TuningIf you do not know the channel number Would like to have the channel stored. IfTo name the channels Switching the locations of the stored channelsDeleting a stored channel Skipping a stored channelSound Menu Settings Settings of Your New TelevisionPicture Menu Settings Picture Format BacklightMpeg NR Picture SmartFeatures Menu Settings Other Picture Features Teletext Fastext Temporary TV Picture UpdateQuestion Answer Button Reveal ClockConnecting an external equipment via Scart connection External Equipment ConnectionsHeadphone Connection Device connected using the Phono input, select Connecting external equipment via Ypbpr connectionAV To watch the picture of the broadcast Connecting an external equipment via Hdmi connection Hdcp HD Copy ProtectionFull HD PC Connection Switching to the PC modePC Setting PC VGA connectionTo Insert a CI Card How To Connect CI Common Interface CardHelp and tips Failure Possible cause SolutionGeneral technical specifications Technical specifications chartMain UK Transmitter Stations What is covered? Guarantee TelevisionHOW to Obtain Service Y1A.801