Bosch Appliances MON150CL Desktop Installation, Connecting the Y/C S-video Signal to the Monitor

MON150CL Instruction Manual Installation EN 8

5.2Desktop Installation

The MON150CL monitor is delivered with a 3-pole US-style power cord and a 3-pole Euro-style power cord. Use the US-style power cord where 120 VAC, 60 Hz power is available; and use the Euro-style power cord where 230 VAC, 50 Hz power is available. Connect the bayonet connector from the power supply to the power input connector on the rear side of the LCD panel, as shown in Photo A. The monitor automatically adjusts to either power input voltage.

Photo A

5.3Connecting the Composite Video Signal to the Monitor

There is one (1) RCA connector located on the rear of the monitor for composite video input (please see Figure 2 on Page 6). Also included is one (1) RCA to BNC adapter used to connect a BNC cable line as shown in Photo B and Photo C.

Photo B

Photo C

5.4Connecting the Y/C (S-video) Signal to the Monitor

There is one (1) mini-DIN type connector for the S-video (Y/C) input (please see Figure 2 on Page 6 and Figure 3 below).

NOTE: Both Y and C inputs are terminated with 75Ω.

4	3	1. GND
		2. GND
		3.	Y-signal IN
2	1	4.	C-signal IN

Figure 3: Y/C Connection Pinout

5.5Connecting Audio to the Monitor

There is one (1) set of mini phone jacks for the audio connector (please see Figure 2 on Page 6 and Photo D below).

Photo D

Bosch Security Systems May 20, 2005