Brother QL-1050N manual Click Utility Installation

„Installing the BRAdmin Light configuration utility for Windows

The BRAdmin Light is a utility for initial setup of Brother network connected devices. It can also search for Brother products on your network, view the status and configure basic network settings, such as IP address.

For more information on BRAdmin Light, visit us at http://solutions.brother.com.

• If you require more advanced printer management, use the latest Brother BRAdmin Professional utility version that is available as a download from http://solutions.brother.com.

• If you are using Personal Firewall software, BRAdmin Light may fail to detect the unconfigured device. In that case, disable your Personal Firewall software, try BRAdmin Light again. Re-start your Personal Firewall software after the address information is set.

1	Click Utility Installation.
	This screen is the same screen as you
	see when you insert the CD-ROM.

2 Click BRAdmin Light and follow the on- screen instructions.

If the Windows Firewall is enabled on your PC, the message “Do you wish to add this application to the list of exceptions?” appears. Check your PC environment and choose Yes or No.

„Setting your IP address, Subnet Mask and Gateway using BRAdmin Light

1 Start BRAdmin Light. It will search for new devices automatically.

If you have a DHCP/BOOTP/RARP server in your network, you don’t have to do the following operation. Because the print server will automatically obtain its IP address.

15

Introduction

STEP

1

Getting started

STEP

2

Software	WindowsFor
	®
the	®
Installing	For Macintosh

STEP

3

Label Overview

STEP

4

Reference