Brother QL-1050N manual „For USB interface cable users, Now, go to step

18STEP2 Installing the Software

6

After restarting the computer, connect the USB/LAN cable to the machine.

As the caution label is put on the USB port of the machine, remove it and then connect the USB cable.

USB port	Serial port
LAN port Power cord

7

Connect the USB/LAN cable to the USB/LAN port of Macintosh®. Press ON/OFF button ( ) of the machine to turn on the power.

When connecting the machine to Macintosh® via USB hub, it may not be connected correctly. At that time, connect the machine directly to the USB port of Macintosh®.

8

Double click the drive where Mac OS® X is installed, and click in order of [Applications]-[Utilities]-[Printer Setup Utility].

„For USB interface cable users

9 Click Add and choose USB at the top of the screen (in Mac OS® X 10.3.9).

Choose QL-1060N from the list and click

Add again to add the printer to the Printer

Setup Utility.

For Mac OS® X 10.4.x, click Add and add the printer with the BRPTUSB connection. (If you do so, an error dialog appears when an printing error occurs.) Set the appropriate printer name.

Now, go to step 10.

„For Network interface cable users (Simple Network Configuration)

9-1

Click Add.

For Mac OS® X 10.3.9 users, make the following selection.

For Mac OS® X 10.4.X users, go to the next step.