Switching On/Off
To Switch the TV On
•Connect the power cord to the
•Press STANDBY touch button. Then the standby LED lights up.
•To switch on the TV from standby mode either:
•Press the “
” button, P+ or P- or a numeric button on the remote control.
•Press the control switch right side of the TV. The TV will then switch on.
Note: If you switch on your TV via P+ or P- buttons on the remote control or on the TV set, the programme that you were watching last will be reselected.
By either method the TV will switch on.
To Switch the TV Off
•Press the “
” button on the remote control or hold the control switch on the Tv until shut down , so the TV will switch to standby mode.
•To power down the TV completely, unplug the power cord from the mains socket.
Note: When the TV is switched to standby mode, the standby LED can blink to indicate that features such as Standby Search, Over Air Download or Timer is active.
Digital Teletext
•Press the “
” button.
•The digital teletext information appears.
•Operate it with the coloured buttons, cursor buttons and OK button.
The operation method may differ depending on the contents of the digital teletext.
Follow the instructions displayed on the digital teletext screen.
•When the “
” button is pressed, the TV returns to television broadcasting.
•The aspect ratio (picture shape) when watching a channel with just digital teletext broadcasting is the same as the aspect ratio of the picture viewed previously.
Input Selection
Once you have connected external systems to your TV, you can switch to different input sources. Press “SOURCE” button on your remote control consecutively for directly changing sources.
(optional)
Note: YPbPr mode can be used only when you connect a device that has a YPbPr output through the PC input with YPbPr to PC cable (not supplied).
Basic Operations
You can operate your TV using both the remote control and onset buttons.
Operation with the Buttons on the TV Volume Setting
•You can move the control switch upward or downward for changing the volume. To increase volume, please move the switch upward. Move the switch downward to decrease the volume. A volume level scale (slider) will be displayed on the screen.
Programme Selection
•First press the control switch once to change channel. You can move the switch upward to select the next programme or move it downward to select the previous programme.
Viewing Main Menu
•Menu screen cannot be displayed by using the control switch.
AV Mode
•Press the control switch consecutively until the source OSD is displayed on the screen.
Operation with the Remote Control
•The remote control of your TV is designed to control all the functions of the model you selected. The functions will be described in accordance with the menu system of your TV.
English - 54 -