Manual Tuning, Managing Stations Channel List

Select Automatic Channel Scan (Retune) by using “ ”/“” button and press OK button. Automatic Channel Scan (Retune) options will be displayed. You can select options by using “”/“” and OK buttons.

Auto Channel Scan (Retune) Menu Operation

Analogue: Searches and stores analogue stations.

Digital & Analogue: Searches and stores both analogue and aerial DVB stations.

•Whenever you select an automatic search type and press OK button, a conﬁrmation screen will appear on the screen. To start installation process, select Yes, to cancel select No by using .“” or “” and OK button.

•After the auto channel scan type is set and selected and conﬁrmed, the installation process will start and the progress bar will move along. Press “MENU” button to cancel process. Located channels are not stored if the process is cancelled.

Manual Tuning

HINT: This feature can be used for direct broadcast entry.

•Select Manual Channel Scan from the Installation menu by using “”/“” and OK buttons. Manual Scan options screen will be displayed.

•Select the desired Search Type using “” or “” button. Manual search options will change accordingly. Use “”/“” button to highlight an item and then press “” or “” button to set an option. You can press “MENU” button to cancel.

Digital Manual Search

In manual channel scan, the number of the multiplex or frequency are entered manually and only that multiplex or frequency are searched for the channels. After selecting search type as Digital, you can enter the multiplex or frequency number using the numeric buttons and press OK button to search.

Analogue Manual Search

After selecting search type as analogue, you can use “”/“” button to highlight an item and then press “ ” or “” button to set an option.

Enter the channel number or frequency using the numeric buttons. You can then press OK button to search. When the channel is located, any new channels that are not on the list will be stored.

Analogue Fine Tune

•Select Analogue Fine Tune from the Installation menu by using “” or “” and OK buttons. The analogue ﬁne tune screen will be displayed. The Analogue Fine Tune feature will not be available if there are no analogue channels, digital channels and external sources stored.

•Press OK button to proceed. Use “” or “” button to set Fine Tune. When ﬁnished, press OK button again.

Managing Stations: Channel List

The TV sorts all stored stations in the Channel List. You can edit this channel list, set favourites or set active stations to be listed by using the Channel List options.

•Press “MENU” button to view main menu. Select the Channel List item by using “” or “” button. Press OK to view menu contents.

Select Edit Channel List to manage all stored channels. Use “” or “” and OK buttons to select Edit Channel List.

English - 57 -