Akai ALED2405T manual Configuring Date/Time Settings, Configuring Source Settings, Deleting a Timer

Deleting a Timer

•Select the timer you want to delete by pressing “ ” or “” button.

•Press RED button.

•Select YES by using “” or “” buttons to delete the timer. Select NO to cancel.

Configuring Date/Time Settings

Select Date/Time in the Settings menu to configure Date/Time settings. Press OK button.

• Use “” or “” buttons to highlight Date/Time.

Date,Time,Time Settings Mode and Time Zone Setting will be available.

Use “” or “” buttons to highlight the Time Settings Mode. Time Settings Mode is set using “” or “” buttons. It can be set to AUTO or MANUAL.

When AUTO is selected, Date/Time and Time Zone options will not be available to be set. If MANUAL option is selected as the Time Zone can be altered:

•By pressing “” or “” buttons select Time Zone.

Use “” or “” buttons to change the Time Zone between GMT-12 or GMT+12. Date/Time on the top of the menu list will then change according to the selected Time Zone.

•Changes are automatically stored. Press “MENU” to exit.

Configuring Source Settings

You can enables or disable selected source options. The TV will not switch to the disabled source options when “SOURCE” button is pressed.

(optional)

•Select Sources in the Settings menu and press OK button.

•Press“” or “” buttons to select a source.

•Use “” or “” button to enable or disable the selected source. Changes are automatically stored.

Note: YPbPr mode can be used only when you connect a device that has a YPbPr output through the PC input with YPbPr to PC cable (not supplied).

English - 67 -