22PNEG-951
Thebutton will display four different setup screens.
The screens will display in the following order:
Load On Delay - amount of time before fill auger starts once fill switch has been activated see
Out of Grain Timer - amount of time fill auger will run until fill switch has been activated
Fan Sequencing Delay - minimum amount of time between each fan startup
Unload Cleanout Delay - amount of time unload continues to run once meter rolls have stopped
DELAY BUTTONSCREENS BUTTONPress thebutton and the display will then show a menu selection screen.
This allows you to select between 3 different choices.
• Out of Grain Time - allows you to view or change the Out of Grain Timer, or view how long it took for your
dryer to fill.
• View Grain Temps - allows you to view your grain temperatures on different modules (if so equipped).
• Meter Roll SP Avg - shows you the percentage of time that the speed of the meter rolls system has spent on
HI or Low speed.
Press thebuttons to move the pointer and allow you to select any of the three choices and
then press thebutton to jump to the next menu selection.
Out of Grain Time
Press thebutton and move the pointer to change your selection or just press the
button on the Out of Grain Time selection gives you an additional 3 choices relating to your Out of Grain Timer.
•Set Out of Grain - will allow you to change your Out of Grain Timer settings
•Out of Grain Tmr - view the Out of Grain timer
•Last Load Time - displays the amount of time it took for the fill paddle switch to become activated or the
dryer filled.
Pressing thebutton again on the Set Out of Grain allows you to adjust the time it takes for your dryer
to run whenthe load paddle switch has not been activated. If this timer expires, your dryer will shut down giving you
a out of grain warning. If you have a slow fill auger system, you would probably want to set this setting to a high
value.