Load Delay
The load delay is used to delay the starting of the load auger when the dryer is unloading to prevent the load auger from cycling to often. To change the setting of this delay follow these instructions:
1. Press the | button. |
2. Press the | button. |
3. | Press the | button to adjust the settings. |
4. | Press the | button to accept the changes. |
Out of Grain Timer
The Out of Grain timer should be set to the maximum time it takes for your dryer to refill during continious or batch mode drying.
If the dryer runs out of grain while the load auger switch is in the auto position, the out of grain timer auto- matically shuts off the dryer after the period of time preset on the timer.
1. Press the | button. Press | to bypass the first screen. |
2. Press the | button. |
| 37 |
