STANDBY-ON
TIMER SET
SLOW
VCR/TV
ZOOM
DISPLAY
3
456
789
SPEED
0
+10
2
1
VCRDVD
CLEAR
REPEAT
SETUP
TITLE RETURNMODE
C-RESET
A-B
AUDIO ANGLESUBTITLE
REC REPEAT
DISC
MENU
OK
PAUSE
REW FF
PLAYSTOP
SKIP/
CH SKIP/
CH
SEARCH MODE

Timer Recording (cont’d) 37

5Press oor puntil the month appears.
Then, press B.
Next, press oor puntil the day appears. Then,
press B. The day of the week will appear. You cannot
record more than one year in advance.

Instructions continue on page 38.

• Enter the information while the
space is flashing.
• To stop a started timer recording,
press STOP/EJECT
C A
on the
front of the DVD/VCR.
More Helpful Hints are on
page 76.
Helpful Hints
6To enter the recording’s start time, press oor puntil
the hour appears. Press B.
Press oor puntil the minute appears. Press B.
Finally, press oor pto point to AM or PM. AM or
PM will flash beside the start time. Press B.
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE 0 5 / 0 4 SUN
START TIME – – : – – – –
END TIME – – : – – – –
CHANNEL – –
REC SPEED – –
7Repeat the procedure in step 6 to set the record-
ing’s end time.
8Press oor puntil the channel number appears.
Then, press B.
●If you are using a standard antenna/Cable TV hookup (as
shown on page eight), select the channel of the TVpro-
gram you want to record.
●If you are recording from other equipment, select L1or
L2. To determine L1or L2, refer to the Helpful Hint
below.
●If you are using a Cable Box/Satellite Receiver, select the
Cable Box/Satellite Receiver output channel (03 or 04).
Then, at the Cable Box/Satellite Receiver, select the chan-
nel you want to record. Leave the Cable Box/Satellite
Receiver on for the timer recording.
Details are on page nine.
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE 0 5 / 0 4 SUN
START TIME 0 7 : 3 0 P M
END TIME – – : – – – –
CHANNEL – –
REC SPEED – –AM
BPM
5-8
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE 0 5 / 0 4 SUN
START TIME 0 7 : 3 0 P M
END TIME 0 8 : 3 0 P M
CHANNEL 16
REC SPEED – –