26PNEG-951
HELP BUTTON
Thebutton currently has no function.
Thebutton is used to change the Dry timer settings when you operate your dryer in the Batch
mode. This button has no effect in the continous drying mode. Please refer to the Staged Batch section.
DRY BUTTON
COOL BUTTON
Thebutton is used to change the Cool timer settings when you operate your dryer in the Batch
mode. This button has no effect in the continous drying mode. Please refer to the Staged Batch section for Batch
operation.
UNLOAD BUTTON
Thebutton is used to change the Unload timer settings when you operate your dryer in the
Batch mode. This button has no effect in the continous drying mode. Please refer to the Staged Batch section for
Batch operation.
PLENUM BUTTON
Thebutton allows you to view the plenum temperature of all the burners on your dryer. Press
ing thebutton allows you to change the plenum set point of the burner being viewed. Press
to advance to the next screen (burner) or to accept any changes you may have made.
GRAIN BUTTON
Thebutton allows you to view or modify the moisture control (grain temperature) set point which
determines the final moisture content of the grain being discharged from the dryer. Press the
button to make any changes. Pressto advance to the next screen or to accept any changes you may
have made.
MODIFY BUTTON
When viewing a screen with settings that can be changed, thebutton will allow you to edit the
values on this screen. Otherwise this button will have no function available.
INCREASE and DECREASE BUTTONS
Theare used when you are editing temperature, time values or for scrolling up and
down the different screen selections.
ENTER BUTTON
Use thebutton to accept any changes you may have made to timer, delay or setup screens. It
is also used to advance to the next screen.