When using remote control
Preparing the remote control
Insert battery (3V, CR2025) into the remote control.
Make sure the + side of the battery faces up before closing the cover.
1)Open the cover,
pull the cover as illustrated
Operating with the remote control
This section shows you how to use the remote control. Point the remote control
at the remote sensor and press the buttons.
The remote range: about 4m from the front of the remote sensor.
(Is) off axis: more than 30L in each direction of the front of the remote sensor.
2)Insert cell (3V),Close the cover
DVD VIDEO CD CD/MP3
With about 4m
CLOCK | PLAY |
POWER | DIS |
| 0 |
R | 3 |
CLEA | 2 |
1 | 6 |
| 5 |
| 4 |
Do not expose the remote sensor of the DVD player and the remote control to a strong light source such as direct sunlight or other illumination. If you do so, you may not be able to operate the DVD player via the remote control.
Notes on battery
To operate the remote control correctly, follow the instructions below.
Do not insert cell into the remote control in the wrong direction.
Do not charge, heat, open, or
If the remote control does not function correctly or if the operating range becomes reduced, replace the cell with new one.
Notes on the remote control
Direct the remote control at the remote sensor of the DVD player.
Do not drop or give the remote control a shock.
Do not leave the remote control near an extremely hot or humid place.
Do not spill water or put anything wet on the remote control.
Do not disassemble the remote control.
6