Navi Bars
Control folder ☛ Timer
General
You can programme the Mediamaster to turn on and off at a se- lected time on a selected channel, in conjunction with the timer setting on your VCR.
A useful example of this function is:
If you go out and want to record different programmes on differ- ent channels at different times you set the timer on the Media- master to change to those selected channels.
Remember you must set the timer on your VCR in order to make the recordings.
This function can be used for up to 8 different settings, on dif- ferent dates, times and channels in conjunction with the capabili- ties of your VCR’S timer.
Note! The timer function only works when the receiver is in standby.
Timer setup
•Press select to enter the Timer setup menu.
•First, select Channel List with the 
buttons.
•Then, step to Channel to select the desired TV/Radio channel.
•Set the date using the numerical buttons on your remote con- trol (dd/mm/yy).
•If you enter a wrong digit you can erase it with the 
button.
•Set the start and stop time using the numerical buttons on your remote control.
The different start times may never overlap each other. If you try to enter a start or stop time within an already occupied period of time you will get a warning message.
•Press select to save or back to cancel.
•Press back twice to leave the Navi Bars and return to view- ing mode.
•Press and hold 
to put the Mediamaster in standby.
Up to 8 different events can be predefined. The events will be sorted in start time order.
At each stop time the box will return to standby.
You can erase a predefined event by pressing the 
button.
•Press back to cancel the deletion and select to delete the event.
Control folder ☛ System info
In the menu you find general information about which hardware and software version your Mediamaster is running on.
GB 18