First time installation
General information
Once you have correctly connected the Mediamaster, you also have to perform a “First time installation.”
During this procedure, helpful information is displayed at the bot- tom of the menus.
Please note!
The select button always confirms a selection within these menus, and pressing it will take you to the next step in the instal- lation process. However, and this is important, often more than one value has to be changed in a menu. First, perform all neces- sary changes then, confirm them all by pressing select.
You can always go back to the previous menu by pressing back.
Use 
the buttons to move upwards and downwards from one line to another.
Use 
buttons to change settings.
You can also use the numeric buttons on the remote control to enter numeric values.
Switching on for the first time and start the “First time installation”
•Ensure you have selected the AV (SCART) channel on your TV
•The ”First time installation” menu is shown.
•Press select to continue.
GB 11