Adjusting Settings
3.2 Setting the Main Display Mode
You can switch between input sources and display them on the main screen in sequence by repeatedly pressing either:
•the MAIN key on the remote control
•the SOURCE key on the LCD control panel
The Main display mode rotates between:
• | TV |
|
|
|
| |
|
|
|
| |||
• | AV | 1 : TV | 2 : | OFF | VGA YPbPr | |
• | ||||||
|
|
|
| |||
• | YPbPr |
| Main display mode indicator | |||
• | VGA |
| ||||
The OSD menus for each display mode allow you to set options that are spe- cific to the selected video signal format. Refer to “Adjusting Settings” on page 9 for information on adjusting settings for each display mode.
3.3 Setting the Picture-in-Picture Display Mode
The LCD display is capable of displaying a second video input signal on the LCD screen at the same time as the main signal. This second signal, or source, is shown on the LCD screen in a box over top of the main image - this is referred to as
1 : TV | 2 : OFF VGA YPbPr |
| PIP display mode indicator |
ENGLISH
10 