Miscellaneous Settings Setting the OSD Timer

Adjusting Settings

NOTE:

To return all audio settings to their factory defaults, select “Recall” from the menu and press VOL+.

3.8Miscellaneous Settings

3.8.1Setting the OSD Timer

You can change the length of time the OSD will remain on the screen after the last key has been pressed. Available options are: 5, 10, 15, 20, 25 or 30 seconds.

3.8.2 Setting the OSD Language

You can change the language in which the OSD menus appear. Available languages are: English, Deutsch (German), Français (French), Italiano (Italian), Español (Spanish), Japanese, Simplified Chinese and Tradi- tional Chinese.

3.8.3 Changing the PIP Size

When two or more video sources are connected to the LCD display, you can set one to appear on the full screen (Main) and one to appear in the Picture-in-Picture screen (PIP or Sub).

There are fiver different PIP sizes to choose from in the OSD menu: 1/2, 1/4, 1/8, 1/16, and 1/32.

3.8.4 Setting the PIP Position

The position of the picture-in-picture window on the screen can be adjusted to suit your preferences. Each position is numbered from upper- left (0) to lower-right (3). The center position is number 4.

3.8.5 Setting the Sleep Timer

The sleep timer turns the LCD display off after a preset period of time. Press the SLEEP button on the remote control to select the length of time from the available settings: 30 minutes, 60 minutes, or 90 minutes. Select “Off” if you do not want the LCD display to shut off automatically.

ENGLISH