
Adjusting Settings
To reset the password, press the VOL+ and the PRG key on the control panel simultaneously. Enter your new password at the prompt and wait five seconds. The new password will be saved.
3.6 VGA (PC) Settings
The LCD display supports standard RGB VGA connections from a PC using the included
Note:
For optimum results, set your PC’s video resolution to 640x480 pixels. If the resolution is set higher than this, the picture may be unclear or not visible.
3.6.1 Adjusting the VGA Display Automatically
For most users, allowing the LCD display to automatically adjust VGA display settings using the AUTO function in the OSD under VGA mode gives the best results.
3.6.2 Adjusting the VGA Display Manually
You can adjust the various VGA display settings manually to suit your personal preferences. Available settings include contrast, brightness, color temperature, and white balance. Change the settings by navigating through the OSD menu system to the Display menu. Use VOL+/– to adjust values.
White Balance
The LCD display provides automatic white balance adjustment. Make sure the display is showing a white square (at least 4 cm x 4 cm) in the center of the screen and select “White Balance” in the Display menu.
Press VOL+ to activate the white balance
ENGLISH
17