3.5.2 Using Quick Channels
The quick channel function lets you assign ten channels that can be accessed by the quick channel keys on the remote control.
Press PRG/CH 
/
in the QUICK CH block on the remote control to switch between assigned quick channels.
Adjusting Settings
Quick
Channel
Block
ENGLISH
Assigning Quick Channels
1First choose a channel you want to add to the quick channels by using
the normal PRG/CH 
/
keys or by entering a channel number directly with the number keys on the remote control.
2Press the MEM key in the quick channel block on the remote control.
3Use the number keys to assign a number between 0 and 9 to the current channel.
4Wait five seconds. The quick channel screen disappears and the new quick channel assignment is complete.
Deleting Quick Channels
1First press the DEL key in the QUICK CH block on the remote control.
2The quick channel settings appear on the screen. Press the number key (0 to 9) of the channel you want to delete. The setting for this quick channel changes to “OFF”.
3Wait five seconds. The quick channel screen disappears and the quick channel is deleted.
14 