Receiver upgrade
If your Service Provider has a new software version available for the Mediamaster, you can enter this menu and obtain informa- tion.
If no software is available, you will get the message “No new software available”.
During downloading periods you are prevented from changing any settings. The display will show “UPGRADE” during a download procedure.
IMPORTANT! The update procedure may take up to one hour! DO NOT turn off the Mediamaster or disconnect the cable to the antenna input during this procedure!!
First time Installation
Will start the Installation procedure from the “Welcome Menu”.
When you enter the “Welcome Menu” again and press the OK button, you should be aware of the fact that all previous channels and settings will be erased! Press the EXIT button to leave the menu without making any changes.
Symbols on the Mediamaster display
No TS No Transport Stream | ? No function. |
= No signal. |
|
Channel name. | Err Error message. |
| UPGRADE |
Signal indicator. | The Mediamaster is busy |
A square means full signal. | downloading new software. |
GB 20 |
|