Nokia 9600C owner manual Connecting to a TV and a video recorder

Connecting to a TV and a video recorder

Refer to your video recorder manual for full instructions.

• Connect one SCART cable between the TV and the TV SCART socket on the Mediamaster.

• Connect another SCART cable between the video recorder and the VCR SCART socket on the Mediamaster.

• A RF cable has to be connected between the

TV/VCR output on the Mediamaster and its corresponding input on the Video recorder.

•Finally, connect another RF cable from the RF output on the video recorder to the TV aerial input on the TV.

Connecting to an analogue satellite receiver and a video recorder

•Connect one SCART cable between the TV and the TV SCART socket on the Mediamaster.

•Connect one SCART cable between the TV SCART socket on the analogue satellite receiver and the AUX

SCART socket on the Mediamaster.

•Connect one SCART cable between the video recorder and the VCR SCART socket on the

Mediamaster.

•Connect a RF cable from the RF output on the video recorder to the TV aerial input on the TV.

•Connect a RF cable from the TV/VCR socket on the Media- master to the RF input on the video recorder.

•Connect a RF cable from the aerial socket to the socket marked ”ANTENNA” on the Mediamaster.

With Video recorder

VCR

Analogue receiver

Without the VCR, you should connect as shown in the diagram to the right.

Analogue receiver

GB 6