About the Smart Card and CA Module
To be able to receive
The Service Provider is the distributor of the programmes.
If you are subscribing to services from more than one Service Provider, you might have to change between different CA Mod- ules and Smart Cards.
Please note, that a smart card is connected to a single Service
Provider and due to this, a specific range of channels.
Only "free" channels are available without the Smart Card.
Note: The mains plug must not be plugged in before inserting the CA module!
•Insert the CA module fully into the slot behind the lid in the front panel of the Mediamaster so that the arrow on the module faces upwards and inwards.
•Insert your card fully into the slot on the CA module, so that the microchip (the yellow spot) faces upwards and inwards.
After inserting the card, leave it in the slot permanently. Do not remove it again, unless your Service Provider asks you to do so. This is important, because if your Service Provider wants to download new information to the Mediamaster, the card has to be in the slot.
Please note, that the CA module and the Smart Card may give special menus not described in this Manual.
PIN Code
The card is loaded with a
The code is essential for the future extra services offered by the
Service Provider.
GB 9