Navi Bars
Control folder ☛ Timer
General
You can make the Mediamaster to start and stop at a predefined time.
The timer function is very useful when you want to record a pro- gramme and you are unable to start/stop the recording event yourself, or when you just want to be reminded of the start of a programme you do not want to miss.
Note! The timer function only works when the receiver is in standby.
Timer setup
•First, select Channel List with cursor left/right.
•Then, step to Channel to select the desired TV/Radio channel.
•Set the date using the numerical buttons on your remote con- trol (yy/mm/dd).
•If you enter a wrong digit you can erase it with cursor left.
•Set the start and stop time using the numerical buttons on your remote control.
The different start times may never overlap each other. If you try to enter a start or stop time within an already occupied period of time you will get a warning message about it.
•Press select to save or back to cancel.
•Press back twice to leave the Navi Bars and return to view- ing mode.
•Press 
to put the Mediamaster in standby.
Up to 8 different events can be predefined. The events will be sorted in start time order.
At each stop time the box will return to standby.
You can erase a predefined event by pressing cursor right.
•Press back to cancel the deletion and select to delete the event.
Control folder ☛ System info
If you have to contact your service provider or a service centre, they might ask for information available from this menu.
In the menu you find general information about which hardware and software version your Mediamaster is running on.
GB 28