2.0 INSTALLATION
Read this section prior to installing the computer. Following these steps will ensure a successful installation of the computer system.
2.1UNPACKING
Components used in these systems are electrostatic sensitive. Observe proper electrostatic discharge (ESD) procedures when unpacking and handling the computer.
The shipping configuration of the
AC Power cord, +24VDC power cable, or pigtail for ±12 V, ±5V operation.
Serial cable with 2
Single Board Computer manual.
Operating system software.
A panel mounting gasket if the panel mount option is ordered.
Touch Driver Diskette if touch option is ordered. The touch manual is on the diskette.
SSD Documentation if the SSD option is ordered
This User Manual.
Remove the computer from the protective wrapping and inspect the unit for any obvious damage incurred during shipping. Contact the shipper if any damage is noted.
7