Preparations (Step 1 Connection and Installation)
Cable Connections
Caution
In order to prevent foreign objects from entering inside the ceilingn mount be sure to attach the hemispherical cover correctly. The penetration of foreign objects into the Ceiling Mount may cause a malfunction and smoking or in the worst case a fire ignition.
1. Making the hole
Make a hole for passing the connection cables through the inner side of the ceiling.
Diameter 90 mm | Make a 90 mm (3.5 inches) diameter hole in the ceiling. |
(☞Page 39) |
2. Connect the cables
Connect the cables to the terminals on the Ceiling Mount.
Lan cable
Alarm signal cable
Coaxial cable
Power cord
The connection cables include Alarm Sig- nal cable, LAN cable, coaxial cable and DC18V power cable.
1. LAN cable(☞Page 17) Connect to the hub or PC.
2. Alarm Signal cable (☞Page 18) Connect to devices with an alarm output terminal.
3. Coaxial cable (☞Page 16) Connect to the monitor, etc.
4. Power cord (☞Page 15)
Connect to the supplied AC adaptor.
14
