3. Select [Internet Protocol (TCP/IP)] and click [Properties].
Select [Internet Protocol (TCP/IP)].
Click 
.
4. Select [Use the following IP address] to set [IP Address] and [Subnet Mask] and then click
.
Select [Use the following IP address].
Set [IP Address] to Ò192.168.0.3.Ó
Note
● Before changing the IP address, note down the original address.
● Do not use the same IP address elsewhere in this network environ- ment.
Set [Subnet Mask] to an appropriate value according to the operating environment. Ask the network administrator if necessary.
Click 
.
5. Click 
in [Local Area Connection Properties].
25
