Settings (Step 3 Setting with V.Networks Controller)
Function Settings with V.Networks Controller
With [V.Networks Controller], settings for image size, alarm etc. can be performed.
1 2 3
1 File |
|
New | : Creates a new file if the cam- |
| era is connected for the first |
| time. |
Delete | : Deletes a file. |
Motion Detect |
|
Standby | : Not functional on this unit. |
Exit | : Exits “Controller.” |
2 View |
|
Image Size | : Sets the image display size. |
| JPEG : 640x480 320x240 |
Upside Down | : Displays the image inversely. |
| This function is used in the |
| case that the camera is in- |
| versely installed. |
3 Control (C) |
|
Auto Pan | : Select this item and click to start |
| Auto Pan operation. |
Auto Patrol | : Select this item and click to start |
(Mode1 to | Auto Patrol for the selected |
Mode3) | mode. |
Auto trace | : Select this item and click to start |
| Auto Trace operation. |
Auto Pan Stop | : Click to stop Auto Pan operation. |
Auto Patrol Stop | : Click to stop Auto Patrol operation. |
Auto Trace Stop | : Click to stop Auto Trace operation. |
Note
●The followings are disabled during Auto Pan:
•Auto Pan Setting
•Auto Patrol Setting
•Auto Trace Setting
•Position Setting
•Pan Control
●The followings are disabled during Auto Patrol:
•Auto Pan Setting
•Auto Patrol Setting
•Auto Trace Setting
•Pan/Tilt Control
•Zoom Control
●The followings are disabled during Auto Trace:
•Auto Pan Setting
•Auto Patrol Setting
•Auto Trace Setting
•Pan/Tilt Control
•Zoom Control
•Focus Control
32