Installation | Features |
Locate the receiver in the room where direct light does not strike the screen.
Total darkness or a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing.
Allow enough space between the receiver and the wall to permit ventilation.
Avoid excessively warm locations to prevent possible damage to the cabinet or premature component failure.
This TV operates on AC supply directly, connect the AC plug to the socket at the back of the TV. Insert the mains plug in the socket having a mains voltage of
Do not install the receiver in a location near heat sources such as radiator, air ducts, direct sunlight, or in a place somewhere like close compartment and close area.
Do not cover the ventilation openings when using
Up to 200 programme memory.
Twin Scart connections.
Programme swapping.
Sleep timer.
4:3,Zoom1,Zoom2,panorama and Full screen picture modes.
When no TV signal is dectected,after 5 minutes the TV switches itself automatically to
CYS: PAL / NTSC
SYS: DK / I/ M
HDMI Input (support up to 1080i)
PC Input (support up to 1080i)
PIP
NICAM Stereo / AVStereo
Panel Features
High resolution (1366x768),26 TFT LCD display.
Brightness: 500cd/m2
High contrast ratio (1600:1 Typital)
Viewing angle:1780(H)/1780(V)(CR>10).
In The Box
You should have:
Television
SCART to RCA jack video connector
Remote control
User Guide
Warranty Card
2 x AAA battery
Stand
Wall mount
- 6 -