crystal.bk : cryst-2.fb4 Page 49 Monday, March 23, 1998 4:09 AM

2How to Install Accessories Inside Your PC Workstation Installing Mass Storage Devices

10Remove the plastic panel from the cover by pulling the panel from the left and unhinging its right-hand side. Store the panel in a safe place.

Unclip and lift out the plastic panel

When an IDE CD-ROM Drive Is Installed

When a Flexible Disk Drive Is Installed

11Install any other accessories before replacing the cover and completing the installation.

Completing the Installation of a Drive

1Switch on the computer and press when Setup appears.

2In the Setup program, select the Advanced menu, the IDE Devices submenu. Check that the CD-ROM drive has been detected on the IDE channel.

3Press to save and exit the program.

1Switch on the computer and press when Setup appears.

2In the Setup program, select the Advanced menu, the Flexible Disk Drives submenu, and check that the drive has been detected.

3Press to save and exit the program.

49