crystal.bk : cryst-2.fb4 Page 45 Monday, March 23, 1998 4:09 AM

2How to Install Accessories Inside Your PC Workstation Installing Mass Storage Devices

9Locate the appropriate data cable for the disk drive.

Wide SCSI devices should be connected to a free SCSI connector on the SCSI cable (you can add up to five SCSI devices).

IDE drives should be connected to a free IDE connector on the IDE cable (you can add up to two IDE devices).

Up to 13 external SCSI devices can be connected via the external SCSI

connector.

Narrow SCSI devices should be connected to a free SCSI connector on the SCSI cable (you can add up to two SCSI devices).

10Connect the data and power cables to the rear of the device. (The connectors are shaped to go in one way only.)

Data Cable

Power Cable

11Slide the power supply back into position, and tighten the four self- retaining screws (see page 30).

45