crystal.bk : cryst-2.fb4 Page 42 Monday, March 23, 1998 4:09 AM

2 How to Install Accessories Inside Your PC Workstation

Installing Mass Storage Devices

8Locate the appropriate data cable for the hard disk drive.

Wide SCSI devices should be connected to a free SCSI connector on the SCSI cable (you can add up to five SCSI devices).

IDE drives should be connected to a free IDE connector on the IDE cable (you can add up to two IDE devices).

Up to 13 external SCSI devices can be connected via the external SCSI connector.

Narrow SCSI devices should be connected to a free SCSI connector on the SCSI cable (you can add up to two SCSI devices).

9Connect the power cable and the data cable to the rear of the drive. (The connectors are shaped to go in one way only.)

Data Cable

Power Cable

10Install any other accessories before completing the installation.

11Turn to page 46 to complete the installation.

42