HP XU crystal.bk : cryst-2.fb4Page 51 Monday, March 23, 1998 4:09 AM, not, completely, 4Unscrew and remove the slot cover. Store it in a safe place

crystal.bk : cryst-2.fb4 Page 51 Monday, March 23, 1998 4:09 AM

2How to Install Accessories Inside Your PC Workstation Installing Accessory Boards

4Unscrew and remove the slot cover. Store it in a safe place.

If the slot cover is tight, loosen the screws on the adjacent slots.

Unscrew and remove the slot cover

5Hold the board horizontally by its “top” edge. Slide it into the board guide of the chosen slot. Do not bend the board.

Slide the accessory board into position

6Align the board’s connector with the slot’s socket. Firmly press the board into the socket. Ensure the board’s connector engages completely with the socket and does not touch components on other boards.

51