crystal.bk : cryst-2.fb4 Page 24 Monday, March 23, 1998 4:09 AM

2 How to Install Accessories Inside Your PC Workstation

Supported HP Accessories

Supported HP Accessories

This chapter describes how to install memory, mass storage devices, and accessory boards in your computer.

Internal Mass

Storage Devices

5 Pairs of Rails for Front Access Devices:

- 3.5-inch disk drive rails - 5.25-inch disk drive rails

Up to six accessory boards can be installed:

-One AGP slot (graphics)

-Three 32-bit PCI slots (one used by SCSI/LAN board, one with RAIDport)

-One combination PCI or ISA slot

-One 16-bit ISA slot

Main Memory Upgrades (DIMM slots for ECC SDRAM):

-32 MB (Non-buffered)

-64 MB (Non-buffered)

-128 MB (Non-buffered)

-256 MB (Registered - see note below)

Front Access Drives, for example:

-3.5-inch 1.44 MB flexible disk drive (one third height)

-5.25-inch 1.2 MB flexible disk drive (half height)

-5.25-inch tape drive (half height)

 

Contact your dealer for an up-to-date list of supported devices.

 

 

NOTE

256 MB registered ECC SDRAM DIMMs cannot be used with non-

 

buffered 32 MB, 64 MB or 128 MB DIMMs.

 

 

24