crystal.bk : cryst-2.fb4 Page 43 Monday, March 23, 1998 4:09 AM

 

 

2 How to Install Accessories Inside Your PC Workstation

 

 

Installing Mass Storage Devices

 

Installing a Hard Disk Drive in a Front-Access Shelf

 

 

NOTE

To ensure your hard disk drive is properly located and cooled, you

 

should only install drives that are up to one inch (1”) in height and of a

 

speed equal to or less than 7200 rpm in this shelf.

 

1

Disconnect the computer’s power cord and any telecommunications

 

 

 

cable.

 

2

Remove the computer’s cover (see page 25).

 

3

Remove the fan connection to the system board (see the illustration

 

 

on page 29).

 

4

Press the retaining buttons on each side of the HP UltraFlow airflow

 

 

guide and lift it out of the PC Workstation’s case.

 

5

Slide out the power supply to provide better access to the disk drive

 

 

cables (see page 29).

 

6

Unscrew and remove an unused drive tray.

Remove the drive tray

43