crystal.bk : cryst-2.fb4 Page 35 Monday, March 23, 1998 4:09 AM

2How to Install Accessories Inside Your PC Workstation Installing Memory

Completing the Video

Memory Installation

Procedure

4Replace the video adapter in the computer. Carefully slide the board back into its accessory slot. Firmly press the board into the socket. Make sure that the board slides into the socket completely and does not touch components on other boards. Secure the video adapter.

5Install any other accessories before replacing the cover (see

page 27). Reconnect all cables and power cords.

1Switch on the PC Workstation.

2Check the HP Summary Screen to verify the new configuration (refer to "The HP Summary Screen and Setup Program", on page 101).

NOTE

Video Adapter Accessories Available from Other Sources

For XW Models with

HP Visualize FX4

If you need to use a special video driver for your application, you may be asked to insert the CD-ROM or diskette containing the driver.

Additional accessories, including memory upgrades and a video MPEG module, are available for your video adapter. However, these accessories cannot be ordered from HP. Contact your dealer for more details about these accessories.

To add a texture module to the HP Visualize FX4, refer to the Texture Module Accessory User’s Guide shipped with this accessory.

35