crystal.bk : cryst-4.fb4 Page 137 Monday, March 23, 1998 4:09 AM

4 Technical Information

Using the ArrayConfig Program

The only way to boot on the non-RAID device is to go to the SCSISelect Utility, then select Configure/View Interface Settings. Use the arrow keys to select the SCSI Device Configuration, then in the Include in BIOS Scan option, move to the SCSI Device ID to be disabled and press

the key.

Q:After I installed the FastRAID card, I could not boot Windows NT from my non-striped wide SCSI drive. I get a blue screen with the message “BOOT DEVICE NOT FOUND”.

A: Even if the drive is not configured in a RAID array, you can boot on it before installing the FastRAID card provided that the required SCSI drivers are installed.

137