crystal.bk : cryst-1.fb4 Page 8 Monday, March 23, 1998 4:09 AM

WARNING

1 Setting Up and Using Your PC Workstation

Connecting the Power Cords

Connecting the Power Cords

1Remove any warning labels that may be covering the computer’s power connector on the rear of the computer.

2Connect the power cords to the display and the computer. (The connectors are shaped to go in one way only.)

PC Workstation

Power Connector

Grounded Outlet

Monitor Power Connector

3Connect the display’s power cord and the computer’s power cord to grounded outlets.

For your safety, always connect the equipment to a grounded wall outlet. Always use a power cord with a properly grounded plug, such as the one provided with this equipment, or one in compliance with your national regulations. This PC Workstation is disconnected from the power by removing the power cord from the power outlet. This means the PC Workstation must be located close to a power outlet that is easily accessible.

8