crystal.bk : cryst-2.fb4 Page 48 Monday, March 23, 1998 4:09 AM

2 How to Install Accessories Inside Your PC Workstation

Installing Mass Storage Devices

7Locate the appropriate data cable for the device.

Wide SCSI devices should be connected to a free SCSI connector on the SCSI cable (you can add up to five SCSI devices).

IDE drives should be connected to a free IDE connector on the IDE cable (you can add up to two IDE devices).

Up to 13 external SCSI devices can be connected via the external SCSI connector.

Narrow SCSI devices should be connected to a free SCSI connector on the SCSI cable (you can add up to two SCSI devices).

8Connect the data and power cables to the rear of the device. (The connectors are shaped to go in one way only.)

Data Cable

Power Cable

9Slide the power supply back into position, and tighten the four self- retaining screws (see page 30).

48