Extron electronic SW4 3G HD-SDI Installation and Operation, cont’d, Rear Panel Connections

Installation and Operation, cont’d

1U Universal Rack Shelf

1/2 Rack Width Front False

Faceplate

Front false faceplate uses 2 screws.

Use 2 mounting holes on opposite corners.

(2) 4-40 x 3/16" Screws

Using screws longer

than 3/16” will damage the unit and void the warranty.

Mounting the switcher on a standard rack shelf

Rear Panel Connections

1 2 3 4

1 2 INPUTS 3 4

100-240V~.5A MAX.

50/60 Hz

1OUTPUTS2

RS-232

Tx Rx

	SW4 3G HD-SDI switcher rear panel
A	Power connector — Plug the supplied power cord into this male
	IEC receptacle and into an AC outlet.
B	SDI Inputs 1 through 4 — Connect SDI, HD-SDI, and/or
	3G-SDI video sources to these 75 ohm female BNC connectors.
	N Each input is equalized, regardless of the rate.
C	SDI Outputs 1 and 2 — Connect one or two SDI, HD-SDI, or
	3G SDI display devices to these 75 ohm female BNC connectors.
	The switcher outputs two identical re-clocked SDI signals.

2-4 SW4 3G HD-SDI • Installation and Operation