Locking the Front Panel
To prevent front panel input buttons being pressed accidentally or by unauthorized users, you can place the switcher in executive mode.
To toggle executive mode on and off, press the Input 1 button and the Input 4 button simultaneously, and hold them down for 3 seconds. All front panel LEDs flash three times, indicating the mode switch.
If an input button is pressed while the switcher is in executive mode, all front panel LEDs flash once, then the switcher reverts to the currently selected input.
N
Resetting
If the switcher needs to be reset to factory defaults, press the Input 1 button and hold it while applying power. All front panel LEDs blink once to indicate that the switcher has been reset.
NWhen the switcher is reset, the current build of firmware is used instead of the version that was loaded at the time of manufacture.
SW4 3G |
