Sima Products user manual Setting Up the SUR-25, Date and Clock, Macro Timers

Setting Up SUR-25 User Manual

Chapter 3 – Setting Up the SUR-25

Before the SUR-25 can be used to control a device, it needs to be configured to display your existing remote control buttons and also programmed to send the correct infrared signals. This chapter guides you through the Touch Screen layout and SUR-25 setup procedure.

To get started, you will first set the date and time. Then you can proceed to create devices and program the SUR-25.

SUR-25 User Manual

4.Use the arrow keys to select the time.

5.Press OK

Note: If you used SPEC (Specific Day/Time) you will also have to set

Macro Timers

Date and Clock

To use the Date selection in the SETUP Menu:

1.Press and hold the SETUP button on the Touch Screen for 3 sec. Press each number button (2, 4, 6, 8) until it disappears.

2.Use the arrow buttons on the Touch Screen to select DATE (displayed in the upper right corner) and then press the OK button.

Enter the year, month and date first.

3.Use the LEFT and RIGHT arrow keys to move the curser and the UP and DOWN arrows to change the selection. Press OK when finished.

Now set the hour, and minutes.

4.Use the arrow keys as in Step 3.

5.Press OK when finished and then EXIT to leave the SETUP menu.

Ch.

3

Page

1

2

%5

3

the date.

6.Select the key that the timer will press. If you want, you can switch devices (use device keys) or Touch Screen pages. (Use the

button.)

At the selected time and date, the SUR-25 will send the infrared code or start the macro associated with the key selected in step 6. When finished press the EXIT key to leave the MACRO Menu.

Ch.

6

Page

16 45